Features

• Fits All Motor Frame Sizes
• Lowest Total Installed Cost – Less Time and Less Hardware
• Bridging the Gap Between Rugged and Cost Effective
• Sealed Enclosure
• Optional Second Isolated Output
• Rugged Cast Housing
• Optional Shaft Grounding Kit
• Marker Pulse

Check the availability of this model. Visit Tachometers Availability for more information.

Transducer

The M3 has a high resolution incremental output of up to 2500 pulses per revolution (PPR). It uses a photoelectric sensing circuit for precise resolution and accuracy. The code wheel is a metal disk, not glass or plastic, for maximum reliability.

Enclosure

The rugged design of the M3 makes it perfect for virtually all industrial applications in the paper, metals, textiles, plastics, and converting industries. The enclosure seals out contamination in dusty or damp environments. The rugged cast housing will stand up to the conditions and handling usually found in these industries.

Motor manufacturers have spent many years improving the performance of standard, cast iron, industrial motors. The pulse generator that is used with these motors should be equal to the task. The M3 does just that.

Solid Shaft (Click here to view M3 Brochure or Instruction Sheets)

The M3 combines features from more expensive, heavy, mill-duty designs into a cost effective package. Because of its versatility, it can be used in a wide variety of applications and industries. It can be a NEMA 56C FACE MOUNTED pulse generator with a 5/8″ diameter shaft (Figure 1), or a HOLLOW SHAFT unit for a more universal mount on shafts up to 2 3/8″ in diameter (Figure 2).

Hollow Shaft.

The M3 can be used as a feedback device in AC and DC drive applications, or for instrumentation purposes into process computers, speed meters, or programmable logic controllers. It has been tested to withstand the electrically noisy environment created by high frequency AC drives.

An optional SECOND ISOLATED OUTPUT allows users to send a signal to two different locations. One can be used for drive feedback and the other can be used for instrumentation purposes, or as an on hand spare.

Optional Accessories

• Foot Mounting Bracket
• Second Isolated Output
• Shaft Grounding Brush
• Multiple Connector Options
• Through Shaft Design

Specifications and features are subject to change without notice.

Call Joliet Technologies TODAY 

If you have any questions concerning Avtron’s Tachs, Encoders, and Pulse Generators, please contact us by:
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or
E-mail info@joliettech.com