ABB ACS800 AC DRIVES

0.5 to 100Hp @ 208 to 240V
1.5 to 600Hp @ 380 to 500V

230V Ratings
3-phase supply voltage 200,208 or 230 V – Power ratings are valid at nominal voltage, 230V (50 and 60Hz power lines)

Type Code
NEMA 1 (6,7)
I max
A (3)

Nominal Ratings (4, 5)

Frame
Size
Price
Normal Duty (VT) (1)
(110% I2N)
Heavy-duty (CT) (2)
(150% I2hd)
I 2N
A
P N
HP (7)
I 2hd
A
P hd
HP (7)
Wall Mounted Drives
ACS800-U1-0001-2+P901 6.5 4.9 1 3.5 0.75 R2 CALL
ACS800-U1-0002-2+P901 8.2 6.6 1.5 4.6 1 R2 CALL
ACS800-U1-0003-2+P901 10.8 8.1 2 6.6 1.5 R2 CALL
ACS800-U1-0004-2+P901 13.8 11 3 7.5 2 R2 CALL
ACS800-U1-0006-2+P901 24 21 5 13 3 R3 CALL
ACS800-U1-0009-2+P901 32 27 7.5 17 5 R3 CALL
ACS800-U1-0011-2+P901 46 34 10 25 7.5 R3 CALL
ACS800-U1-0016-2+P901 62 42 15 31 10 R4 CALL
ACS800-U1-0020-2+P901 72 54 20 42 15 R4 CALL
ACS800-U1-0025-2+P901 86 69 25 54 20 R5 CALL
ACS800-U1-0030-2+P901 112 80 30 68 25 R5 CALL
ACS800-U1-0040-2+P901 138 104 40 80 30 R5 CALL
ACS800-U1-0050-2+P901 164 132 50 104 40 R6 CALL
ACS800-U1-0060-2+P901 202 157 60 130 50 R6 CALL
ACS800-U1-0070-2+P901 282 192 75 154 60 R6 CALL
Free Standing Drives w/Enclosure Extensions
ACS800-U2-0080-2+P901 326 211 75 170 60 R7 CALL
ACS800-U2-0100-2+P901 404 248 100 202 75 R7 CALL
ACS800-U2-0120-2+P901 432 290 100 240(4) 75 R7 CALL
ACS800-U2-0140-2+P901 588 396 150 316 125 R8 CALL
ACS800-U2-0170-2+P901 588 440 150 340 125 R8 CALL
ACS800-U2-0210-2+P901 588 516 200 370 150 R8 CALL
ACS800-U2-0230-2+P901 840 598 200 480 200 R8 CALL
ACS800-U2-0260-2+P901 1017 679 250 590(5) 200 R8 CALL
ACS800-U2-0300-2+P901 1017 704 250 635(5) 250 R8 CALL
Note: All drives are supplied w/Operator Control Panel.

For your specific application contact us for pricing.

NOTES

  1. I2N: continuous base current at 40°C (104°F). Overload cycle 110% I2N for 1 minute / 5 minutes allowed at 40°C (104°F) typical.
  2. I2hd: continuous base current at 40°C (104°F). Overload cycle 150% I2hd for 1 minute / 5 minutes allowed at 40°C (104°F).
  3. 1max: current available for 10 seconds at start.
  4. Current ratings do not change with different supply voltages.
  5. The rated current of the ACS 800 must be greater than or equal to the rated motor current to achieve the rated motor power given in the table.
  6. All -U1 models -0001 through -0070 come with a conduit box as standard.
  7. Horsepower is based on NEMA motor ratings for most 2,4 and 6-pole motors (3600, 1800, 1200 rpm). Check motor nameplate current for compatibility.

Contact Joliet Technologies for Custom Drive Pricing.
Phone: (815) 725-9696 or
Toll Free: (866) 492-9888
Fax: (815) 725-9393
E-mail: info@joliettech.com
RFQ – Request for Quote

© 2004 ABB Inc. All rights reserved Specification and pricing subject to change without notice.

ACS800-US-03
Rev. B

Effective: 06/11/03
Supersedes: 10/07/02