PLEASE NOTE: Effective 2019, we no longer supply Control Techniques variable frequency drives and components. We have drives from several other manufacturers which can meet or exceed the performance characteristics of the Control Techniques line. Simply complete the form below, or contact us with the model of your current or obsolete Control Techniques drive and we’ll be glad to identify a suitable replacement.

Also, the Fincor and Saftronics lines of AC variable frequency drives, DC variable speed drives, and reduced voltage starters were once owned by Emerson but have been obsolete for several years. However, we have many years’ experience working with these drives and can quickly identify replacements capable of exceeding the quality and performance of these older drive technologies. For a suitable replacement, fill out the form below or contact us with your drive or application requirements, and we’ll handle it from there!


Saftronics  

Obsolete Drive Replacement RFQ -

If you need a replacement for an existing obsolete drive, complete the following form and we will send you a quote for a suitable replacement.

* Required

Is an encoder or tachometer being used for speed feedback to the drive?:
Opt-In to our e-mail list:

(Obsolete) Saftronics GP10 – General Purpose Open Loop Vector AC Drive (Obsolete FINCOR Series 5700)

Options & Accessories

Name Analog I/O Interface Card

Part Number SOPCG11SAIO

Function
3 analog inputs (2 voltage inputs and 1 current input): Torque limiting value (driving, braking), frequency setting, ratio setting can be input respectively.
2 analog outputs (1 voltage output and 1 current output): 11 types of data can be output.

Specifications
Input Analog signal input (3 point) 32 and 31, 22 and 21, C2 and 21 Terminal 32: Voltage input (both sides): 0 to +10 VDC / 0 to +100%, input impedance 22k ohm
  Terminal 22: Voltage input (both sides): 0 to +10 VDC / 0 to +100%, input impedance 22k ohm
  Terminal C2: Current Input: 4 to 20mADC / 0 to +100%, input impedance 250k ohm For voltage input, power supply terminal for variable resistor (P10) should be connected Related function code o22
Output Analog signal input (2 point) between AO+ and AO-, CS+ and CS
  Terminal AO+:Voltage output 0 to +10 VDC, for max. 2 voltmeters, input impedance: 10 k ohm
  Terminal AO-: Voltage output common.
  Terminal CS+: Current output: 4 to 20mAdc, max. 500 ohm
  Terminal CS-: Current output common
  (Terminal CS- is isolated from terminal 21, 31 and AD-) Related function code 023

Connection Diagram

Connection Diagram Analog I/O Interface Card

To purchase any Saftronics drives or information, contact us at: Phone (815) 725-9696, Toll Free (866) 492-9888, Fax (815) 725-9393 or E-mail info@joliettech.com

Call for availability of drives, and freight options. (815) 725-9696

All prices are subject to change without notice.