Innovation, Customization, Delivery
Dynapar encompasses the broadest line of trusted brands in motion feedback control, including Dynapar encoders and Hengstler brand incremental encoders and absolute rotary encoders, Northstar heavy-duty magneto-resistive and Heavy-Duty optical encoders and high-performance Harowe brand resolvers. Only Dynapar feedback solutions offer these world-class rotary feedback brands from one Global Supplier with 3 day delivery on most models for customer peace of mind.
Joliet Technologies is the preferred Dynapar Integrator for the Chicagoland area.
SLIM Tach® HS56 Incremental Encoder / Tachometer
- For Fan Cooled and Non-Motor Applications
- Hollow shaft design allows for a variety of possible mountings; ideal to retrofit AC fan cooled motors.
- Rugged, zero-speed, magnetoresistive sensing technology is immune to grease, salt water, dust, or other common contaminants.
- Up to 80° C operation
Overview / Design Principle:
The SLIM Tach® HS56’s magnetoresistive sensor technology is virtually immune to common contaminants such as grease, oil, water, and dirt. Hardened encapsulated electronics make it especially resistant to heavy machine vibration and accidental impacts. Advanced electronic design offers many features such as operation from 5-26 volts DC power, short circuit protected outputs, and EMI noise resistance. High power complimentary line driver outputs assure clean, crisp signals over long cable lengths.
A stainless steel and hard anodized aluminum alloy frame provides exceptional strength, ruggedness, and superior corrosion resistance. Its extra heavy duty bearings are designed to maximize its operational life. Since the entire encoder rides on large motor style bearings, the unit can tolerate considerable shaft movement. A strong, insulated, stainless steel anti-rotation arm with multiple mounting holes allows the encoder to move axially, radially, and at a tangent. The simple prealigned design of the HS56 does not require user adjustments.
Easily mounted on fan-cooled motor shafts, conveyor equipment, assembly machines, material feeders, pumps, hydraulic equipment, and gear boxes, the SLIM Tach® HS56 does not require mounting flanges or accessory brackets. If a suitable shaft is not available, a stub shaft installed through the fan shroud into the motor shaft provides a means of easy mounting.
The SLIM Tach® HS56 is also available in with electrically isolated dual outputs. Each output can be operated at different voltages and/or sent to different locations. The dual outputs can be used for security with encoder redundancy. A failed output can be quickly switched to the second output, thereby reducing downtime. Our accessory Intellitach ™, can continuously monitor the encoder feedback, and automatically switch outputs in the case of signal failure.
Features and Benefits:
- Combines rugged reliable feedback with a flexible mounting design. Fits 0.625 – 1.125 inch shaft sizes
- 64, 128, 256, 512, 1024, or 2048 pulses per revolution (PPR) with optional index pulse
- 5-26VDC operation, bi-directional quadrature signals. Short circuit protected, high power line drivers are available
The NorthStar brand SLIM Tach® HS56 has been designed especially for maintenance, motor repair, and field personnel. It offers an unparalleled means of applying a leading edge digital encoder to motors and other devices that require an innovative method of installation.
Standard Operating Characteristics
Pulses per Revolution: 60-2048
Phasing Sense: A leads B for Counter-Clockwise rotation (CCW) viewing encoder-mounted end
Quadrature Phasing: 90° ± 22°
Symmetry: 180° ± 54°
Index: 270° gated to falling B edge
Input Voltage Requirement: 5-15 or 5-26 Volts DC
Current Requirement: With Electrical Option L: 45 mA typical per sensor module plus line driver load
With Electrical Option V or 5: 65 mA typical per sensor module plus line driver load
Output Signals: With Elec Option L: 5-15 V Line Driver, 150mA
With Elec Option V: 5-26 V Line Driver, 100mA
With Elec Option 5: 5V Line Driver, 150mA
Frequency Response: 0 – 120kHz Data & Index
Electrical Immunity: 2kV ESD, Reverse Polarity, Short Circuit
Connector: 10 pin industrial duty latching, sealed NEMA 4 &12, IP65; MS connector or pig-tail
Shaft Speed: 3,600 RPM
Mounting Configuration: Hollow Shaft mount with Anti-Rotation Tether
Housing Material: Hard Anodized Aluminum /Stainless Steel
Acceleration Rate: 3,600 rpm/sec max
Shaft Length Required: 2.0” min
Allowable Shaft End-Play: ± 0.150” (tether limit)
Allowable Shaft Runout: 0.015” TIR typical (rpm dependent)
Operating Temperature Range: -20°C to +80°C
Storage Temperature Range: -40°C to +120°C
Humidity: to 98% RH (non-condensing)
Shock (Sensor Module): 1 meter drop test, 30 G’s Min
Vibration: 18 G’s @ 5-2000 Hz spectrum
- SLIM Tach® HS56 (PDF file)
Related Products & Resources:
- Spare Parts & Accessories
- NEW Northstar Line Brochure (PDF file)
- Feedback Quick Reference Guide (PDF File)
- Encoder Catalog (PDF file)
- Encoder Handbook (PDF file)
- Encoder FAQ’s
For additional information or to receive a full-line catalog, contact your Dynapar representative at 1.800.873.8731 or visit their web site at: www.dynapar.com
Headquarters:1675 Delany Road • Gurnee, IL 60031-1282 • USA
Email: email@example.com or firstname.lastname@example.org
© 2009 Dynapar Corp. Printed in U.S.A. • Feedback Quick Reference Guide P/N# N-FLB130 (11/09) 5M
Call Joliet Technologies TODAY
If you have any questions concerning Dynapar products, feel free to contact us:
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or
Joliet Technologies custom packages, integrates and engineers AC Variable Frequency Drives (VFD), DC Variable Speed Drives (VSD) and AC Drive Controllers using top of the line manufacturers, like ABB, Emerson-Control Techniques, Siemens and Saftronics (Fincor). Our custom drive packages are built to your specifications for your application. We specialize in large horsepower drive systems (500Hp and above). Call us at (815) 725-9696 or fax us at (815) 725-9393 or e-mail us or fill out an RFQ with your requirements. Serving the greater Chicagoland area and the World.