ABB ACS550 AC DRIVES

0.75 HP (.55 kW) to 100 HP (75 kW) @ 208 to 240V
1.0 HP (.75 kW) to 550 HP (355 kW) @ 380 to 480V

ABB ACS550 AC DRIVES

Hardware Description

The ACS550 is available in two mounting configurations. A brief description and photo are provided below to facilitate model selection and understanding of what is offered with each standard product.

ACS550-U1-XXXX-X
The ACS550-U1 is a wall-mountable drive and is available from 0.75 to 100 HP in 230V and to 150 HP in 480V input voltages. The ACS550-U1 has six frame sizes (R1 to R6).  The ACS550-U1 is available in a standard UL Type 1 (NEMA 1) or optional UL Type 12 (NEMA 12)  enclosure and has a control panel for user interface, parameter adjustment and drive operation  mounted on the front of the drive. The front section of the ACS550-U1 contains the electronics,  power and control wire terminals. The rear section forms a cooling channel. The two section  construction allows the unit to be installed protruding through a wall, or through the rear wall of a  customer supplied enclosure using additional hardware, placing the rear section in a cooling air duct  to minimize the heat inside the cabinet. In standard installations, the drive is mounted directly onto  a wall and uses the provided conduit box. Conduit openings (knock-outs) are provided for bottom  and side conduit entry. For mounting inside a customer supplied cabinet, the conduit box may be  removed. R1 and R2 frames have built-in braking choppers.

ABB ACS550-U1 AC Drive

ACS550-U2-XXXX-X 
This product is available from 150 to 550 HP for 480V input power. It is designed to be a  free-standing floor mount enclosure. It is available in a standard UL Type 1 (NEMA 1) enclosure and  is provided with a through the door interlocked, fusible disconnect switch, lockable in the off  position. A control panel for user interface, parameter adjustment and drive operation is provided on  the front of the drive enclosure. Cooling air intake and exhaust vents are covered with grates to  keep out unwanted objects. Input power and motor leads enter through the top of the drive. A US  conduit plate is provided as standard. A common mode filter is provided on drives larger than 250  horsepower.

ABB ACS550-U2 AC Drive

ACS550-02-XXXX-X 
This product is available from 200 through 550 horsepower for 480V input power. It is designed to  be a free-standing floor-mount enclosure. It is available in a standard UL Type 1 (NEMA 1) enclosure  and has a control panel for user interface, parameter adjustment and drive operation mounted on  the front of the enclosure. Cooling air intake and exhaust vents are covered with grates to keep out  unwanted objects. As standard, input power and motor leads enter and exit through the bottom of  the drive in a unique cabling pedestal that provides for drive removal without removal of the cables.  A common mode filter is provided as standard for drives rated 250 Hp or larger. A US conduit plate is  provided as standard.

ABB ACS550-02 AC Drive

© 2004 ABB Inc. All rights reserved Specifications and pricing subject to change without notice.

ACS550-US-03
Rev. E

Effective: 3/1/04
Supersedes: 9/2/03