The dynamic braking option has been designed to achieve faster deceleration rates or to prevent overvoltage trips in regenerative or overhauling applications. The option consists of a dynamic braking module and dynamic braking resistors.
Important application notes:
The standard option has been designed for stopping a load with an inertia equal to or less than the applied motor’s rotor inertia.
High inertia or overhauling loads may cause extended deceleration times which could cause option overheating and tripping of the drive unit.
This option is not a holding brake. It will not prevent a motor at rest from rotating.
Applying less than recommended ohmic values may result in damage to drive.
NOTE: Refer to drive’s instruction manual installation and connection section for details.
To purchase any Saftronics drives or information regarding Saftronics drives and Accessories, contact us at:
Phone (815) 725-9696, Toll Free (866) 492-9888, Fax (815) 725-9393 or
Call for availability of drives, and freight options.
All prices are subject to change without notice.
Need to run a 230V, 3Ph motor with 230V, 1Ph input? Joliet Technologies is pleased to announce that we have the solution to run most 230V, 3Ph motors with only 230V, 1Ph input! For more info, contact us.