WEG Variable Frequency Drives

WEG CFW09 AC Variable Frequency Drives

1 HP to 500 HP

CFW09 – OPTIONS and ACCESSORIES

Intelligent Operator Interface with double display (LED and LCD), plain English messages and COPY Function.
Local or remote installation.
Intelligent Operator Interface with double display (LED and LCD), plain English messages and COPY Function.
COMPLETE
KEYPAD
(STANDARD)
HMI – CFW09 – LCD
NEMA 4/IP55 remote keypad, for installation on panel door or remote operator station in harsh environments, such as splashing or hose-directed water
and windblown dust.
Maximum cable length: 33ft (10m)
NEMA 4/IP5 5 remote keypad
NEMA 4
REMOTE
KEYPAD
HMI – CFW09 – LCDN4
Frame for remote keypad mounting on panel door or operator station.
Optional up to 15ft (5m) cable.
Maximum cable length; 33 ft (10m)
Frame for remote keypad mounting on panel door or operator station.
REMOTE
KEYPAD
FRAME KIT
KMR – CFW09
Cables with lengths (x) of 3.3, 6.6, 10, 15, 25 and 33ft (1, 2, 3, 5, 7.5 and 10m) 7.5 and 10m must use the KMRCFW09 frame kit.
Special cables available upon request.
Remote Keypad Cables. Cables with lengths (x) of 3.3, 6.6, 10, 15, 25 and 33ft
REMOTE
KEYPAD
CABLES
CAB – HMI – 09 – X
RS-232 Serial Interface Module to connect the CFW09 to a PC or other equipment via a RS-232 Serial Link.
RS-232 Serial Interface Module to connect the CFW09 to a PC or other equipment via a RS-232 Serial Link.
RS-232
SERIAL
INTERFACE
KCS – CFW09
WEG Superdrive is a windows based software program that allows serial (RS-232 or RS-485) communication between a PC and WEG Soft Starters and Variable Frequency Drives. Superdrive is an excellent programming, documentation and troubleshooting tool for WEG Soft Starters and VFD’s. Superdrive is available for free download at www.wegelectric.com. Hardware accessories may be required, depending on the Soft Starter or VFD line. Not available for SSW06.
PC Communication Kit
PC
COMMUNICATION
KIT
KSD – CFW09
PLC-01 / PLC-02 : WEG lntegral PLC
The PLC01/02 boards add important PLC (Programmable Logical Controller) functions to the CFW09, enabling the execution of complex logic program by using the digital and analog inputs and outputs as well as the digital and analog inputs and outputs of the own inverter whlch can be accessed by the user program. Functions include simple contacts and coils up to functions that uses floating point, such as sum, subtraction, multiplication, division, trigonometry, square root functions, etc. Other important functions are the PID blocks, high-pass and low-pass filters, saturation, comparison. All these functions operate with floating point. Besides the functions mentioned above, the PLC1 provides blocks for motor speed and motor position control, that is a trapezoidal-profile positioning and a S-profile positioning, speed reference generation with trapezoidal acceleration ramp, etc.
(Note: when position functions used, the coupling of an encoder on motor shaft is required). All functions can interact with the user through the 100 programmable parameters that can be accessed directly through the inverter HMI. The texts and user units of the programmable parameters can be customized by the WLP>
PLC / Motion Control Board
PLC / MOTION
CONTROL
BOARD
PLC 1.01
PLC 2.00

Ethernet IP KFB – EN
ProfiBus DP KFB – PD
DeviceNet KFB – DN
Function
Configuration
EBA…
EBB…
EBC
EBE
01
02
03
01
02
03
04
05
01
02
03
01
Encoder Input
*
*
*
*
*
*
*
Encoder Output
*
*
*
RS-485 Serial Interface
*
*
*
*
*
14 Bit A/D
*
*
14 Bit D/A’s
*
*
Isolated Analog Input
*
*
*
Isolated Analog Output
*
*
*
*
Digital Inputs & Outputs + Thermistor (PTC) Input
*
*
*
*
*
*
*
*
Internal Power Supply
*
*
*
*

I/O EXPANSION BOARDS
EBA.0X – CFW09
EBB.0X – CFW09
EBC1.0X – CFW09
EBE.0X – CFW09

 

CFW09 – OPTIONS and ACCESSORIES

Description
Catalog Number
Price
Dynamic Braking
External Dynamic Braking Module for 180A Model (16 X 9 X 10 NEMA 1 Enclosure)
DBW010165D36801
CALL
External Dynamic Braking Module for 211 & 240A Models (16 X 9 X 10 NEMA 1 Enclosure)
DBW010240D36801
CALL
External Dynamic Braking Module for 312, 361, 450, 515 & 600A Models (16 X 9 X 10 NEMA 1 Enclosure)
DBW010300D36801
CALL
External Dynamic Braking Module for 107, 147, 211 & 247A Models at 575V (16 X 9 X 10 NEMA 1 Enclosure)
DBW020210D50691 (!)
CALL
External Dynamic Braking Module for 315 & 343A Models at 575V (16 X 9 X 10 NEMA 1 Enclosure)
DBW020300D50691 (!)
CALL
External Dynamic Braking Module for 418 & 472 Amp Models at 575V (16 X 9 X 10 NEMA 1 Enclosure)
DBW020380D50691 (!)
CALL
Keypads
Standard Keypad with LED & LCD
HMI-CFW09-LCD
CALL
NEMA 4 / IP56 Remote Keypad with LED & LCD
HMI-CFW09-LCDN4
CALL
Remote Keypad FRAME KIT
KMR-CFW09
CALL
Blank Keypad with Power & Error LED’s
TCL-CFW09
CALL
Remote Station-Includes Start PB, Stop PB, and Speed Pot
CFW-REM
CALL
Keypad Cables
3.3ft Remote Keypad Cable
CAB-HMI-09-1
CALL
6.6ft Remote Keypad Cable
CAB-HMI-09-2
CALL
10ft Remote Keypad Cable
CAB-HMI-09-3
CALL
16ft Remote Keypad Cable
CAB-HMI-09-5
CALL
25ft Remote Keypad Cable (Requires KMR-CFW09)
CAB-HMI-09-7
CALL
33ft Remote Keypad Cable (Requires KMR-CFW09)
CAB-HMI-0910
CALL
Communication *see note
Superdrive PC Communication Kit (includes software & hardware accessories)
KSD-CFW09
CALL
RS-232 Serial Interface
KCS-CFW09
CALL
Profibus DP Communication Kit
KFB-PD
CALL
DeviceNet Communication Kit
KFB-DN
CALL
Ethemet IP Communication Kit (V3.70 or superior)
KFB-EN
CALL
DeviceNet Profile Communication Kit (V2.27 or superior)
KFB-DD (!)
CALL
Caps
External DC Bus Cap Kit 1500uF (includes bleed resistor, mounting bracket, & screws)
KIT KCE-CFW09/1500uF
CALL
External DC Bus Cap Kit 4700uF (includes bleed resistor, mounting bracket, & screws)
KIT KCE-CFW09/4700uF
CALL
I/O Expansion Boards
I/O Exp. Board A with Encoder Input, Encoder Output, RS-485 Serial Interface, I4 bit A/D, I4 bit D/A’s, Digital Inputs and Outputs + Input
EBA.01-CFW09
CALL
I/O Exp. Board A with RS-485 Serial Interface, Digital Inputs and Outputs + Thermistor (PTC) Input
EBA.02-CFW09
CALL
I/O Exp. Board A with I4 bit A/D, I4 bit D/A’s, Digital Inputs and Outputs + Thermistor (PTC) Input
EBA.03-CFW09
CALL
I/O Exp. Board B with Encoder Input, Encoder Output, RS-485 Serial Interface, Isolated Analog Input, Isolated Analog Outputs, Digital Inputs and Outputs + Thermistor (PTC) Input
EBB.01-CFW09
CALL
I/O Exp. Board B with Encoder Input, Digital Inputs and Outputs + Thermistor (PTC) Input
EBB.02-CFW09
CALL
I/O Exp. Board B with Isolated Analog Input, Isolated Analog Outputs, Digital Inputs and Outputs + Thermistor (PTC) Input
EBB.03-CFW09
CALL
I/O Exp. Board B with Encoder Input, 5V Power Supply for Encoder, Buffered Outputs for Encoder Signals, RS-485 Serial Port, 24V Digital Input, 2 X 24V OC Digital Outputs, 0…10V/4-20mA Analog Input, 2 X 4-20mA Analog Outputs and PTC
EBB.04-CFW09
CALL
I/O Exp. Board B with 2 X 4-20mA Analog Outputs
EBB.05-CFW09
CALL
I/O Exp. Board C with Encoder Input, 5-15VDC External Power Supply
EBC1.01-CFW09
CALL
I/O Exp. Board C with Encoder Input with intemal Power Supply – 5VDC
EBC1.02-CFW09 (!)
CALL
I/O Exp. Board C with Encoder Input with intemal Power Supply – 12VDC
EBC1.03-CFW09
CALL
I/O Exp. Board E with RS-485 Serial Interface, Digital Inputs and Outputs + Thermistor (PTC) Input
EBE.01-CFW09
CALL
PLC/Motion Control Board
PLC1.01
CALL
PLC/Motion Control Board
PLC2.00
CALL
Thru Surface Mounting
Kit for Through Surface Mounting – Size 3
KMF-CFW09-M3
CALL
Kit for Through Surface Mounting – Size 4
KMF-CFW09-M4
CALL
Kit for Through Surface Mounting – Size 5
KMF-CFW09-M5
CALL
Kit for Through Surface Mounting – Size 6
KMF-CFW09-M6
CALL
Kit for Through Surface Mounting – Size 7
KMF-CFW09-M7
CALL
Kit for Through Surface Mounting – Size 8
KMF-CFW09-M8
CALL
Parallel Mounting
Kit for Parallel Mounting – 686A(2 x 361A)
KMP-CFW09-686
CALL
Kit for Parallel Mounting – 855A (2 x 450A)
KMP-CFW09-855
CALL
Kit for Parallel Mounting – 1140A (2 x 600A)
KMP-CFW09-1140
CALL
Kit for Parallel Mounting – 1283A (3 x 450A)
KMP-CFW09-1283
CALL
Kit for Parallel Mounting – 1710A (3 x 600A)
KMP-CFW09-1710
CALL

(!) Non-Stocked Item, consult WEG for availability
* Mobus RTU – Requires optional RS-232 or RS-485 Interface

Contact Joliet Technologies for Custom Drive Pricing.
Phone: (815) 725-9696 or
Toll Free: (866) 492-9888
Fax: (815) 725-9393
E-mail: info@joliettech.com
RFQ – Request for Quote

© WEG Industrias. All Rights Reserved.
Specifications and pricing subject to change without notice.