PLEASE NOTE: Effective 2019, we no longer supply Control Techniques variable frequency drives and components. We have drives from several other manufacturers which can meet or exceed the performance characteristics of the Control Techniques line. Simply complete the form below, or contact us with the model of your current or obsolete Control Techniques drive and we’ll be glad to identify a suitable replacement.

Also, the Fincor and Saftronics lines of AC variable frequency drives, DC variable speed drives, and reduced voltage starters were once owned by Emerson but have been obsolete for several years. However, we have many years’ experience working with these drives and can quickly identify replacements capable of exceeding the quality and performance of these older drive technologies. For a suitable replacement, fill out the form below or contact us with your drive or application requirements, and we’ll handle it from there!


Saftronics  

Obsolete Drive Replacement RFQ -

If you need a replacement for an existing obsolete drive, complete the following form and we will send you a quote for a suitable replacement.

* Required

Is an encoder or tachometer being used for speed feedback to the drive?:
Opt-In to our e-mail list:

(Obsolete) Saftronics GP10 – General Purpose Open Loop Vector AC Drive (Obsolete FINCOR Series 5700)

Options & Accessories

Name Sleep Function + Reference Loss + Over / Under Torque Detection Option Card Kit

Part Number 100-0175-01

Function The 100-0175-01 Option Card is designed for use with the Saftronics’ GP10 / VG10 inverter series. It monitors three independent input functions, and provides three form C dry contact relay outputs for control purposes. Each function can be enabled or disabled by a dipswitch setting. The levels and time for the Sleep Function and the High / Low Torque Level Detection are set by on board potentiometers for ease of setup. LED indicators show the active state of the various functions.

Specifications
Input Signals: FB – Feedback reference (positive)
  REF – Reference (positive)
  TRO – Torque (positive)
  GND – Signal common
   
Input Signal Voltage/Current – 0 – + 10 VDC or 0 – 20mA / 4 – 20 mA Qumper selectable) Input Resistance – 10 kOhm (voltage input) Input Resistance – 500 Ohm (current input)Relay Outputs – (3) Form C contact rated at 120 VAC @ 0.5 A / 24 VAC @ 1.0A.

Connection Diagram

Connection Daigram Sleep Function + Reference Loss + Over / Under Torque Detection Option Card Kit

To purchase any Saftronics drives or information, contact us at: Phone (815) 725-9696, Toll Free (866) 492-9888, Fax (815) 725-9393 or E-mail info@joliettech.com 

Call for availability of drives, and freight options. (815) 725-9696