ABB Component Drives
ACS150, 0.5hp to 5hp Technical Guide
- ABB ACS150 Component Drives
- Technical Specifications
- Ratings, Types, Voltages and Construction
Notes for Product Selection
240VAC Ratings (prices)
480VAC Ratings (prices) - Dimensions, Weight and Noise
- Interface and Options (prices)
- Technical Data
- Control Connections
Ratings, types, voltages and construction
| – |
| – |
| – |
|
Type code |
This is a unique reference number that clearly identifies the drive by power rating, voltage, and construction. Once you have selected the type code, the frame size can be used to determine the drives dimensions, shown below. |
Voltages |
The ACS150 is available in two voltage ranges: 2 = 200 – 240 V 4 = 380 – 480 V |
Construction |
“01U” and “03U” within the type code indicates the number of phases for power. 01 = 1-phase (200 – 240V only) 03 = 3-phase (200 – 240V and 380 – 480V) U = EMC filter disconnected, 60 Hz frequency (In case the filter is required it can easily be connected.) |
Notes for Product Selection
General Notes
- I2N: continuous base current at 40°C (104°F) and 50°C (120°F). Overload cycle 150% for 1 minute / 10 minutes allowed.
- Continuous output current at 5O°C (120°F) shown for 230Vac NEC motor ratings.
When used at 50°C (120°F) at input voltages less than 230Vac may require larger drive. - Current ratings do not change with different supply voltages.
- The rated current of the ACS150 must be greater than or equal to the rated motor current to achieve the rated motor power given in the table.
- Horsepower ratings are based on NEMA motor ratings for typical 4-pole motors (1800 rpm). Check motor nameplate current for compatibility.
240Vac Ratings (pricing)
3-phase supply voltage 208, 230 or 240 V. The power ratings are valid at nominal voltage, 208Vac at 40°C (104°F) or 230Vac at 50°C (120°F).
Type Code | Nominal ratings | IP 20 | ||||
40°C (104°F) | 50°C (120°F) | Frame | ||||
I2N A | PN HP | I2N A | PN HP | List Price | ||
1-Phase Un = 200…240V (200, 208, 230, 240V) | ||||||
ACS150-01U-02A4-2 | 2.4 | 0.5 | 2.2 | 0.50 | R0 | CALL |
ACS150-01U-04A7-2 | 4.7 | 1 | 4.2 | 1.0 | R1 | CALL |
ACS150-01U-06A7-2 | 6.7 | 1.5 | 6.0 | 1.5 | R1 | CALL |
ACS150-01U-07A5-2 | 7.5 | 2 | 6.8 | 2 | R2 | CALL |
ACS150-01U-09A8-2 | 9.8 | 3 | 8.8 | 2 | R2 | CALL |
3-Phase Un = 200…240V (200, 208, 230, 240V) | ||||||
ACS150-03U-02A4-2 | 2.4 | 0.50 | 2.2 | 0.50 | R0 | CALL |
ACS150-03U-03A5-2 | 3.5 | 0.75 | 3.2 | 0.75 | R0 | CALL |
ACS150-03U-04A7-2 | 4.7 | 1 | 4.2 | 1 | R1 | CALL |
ACS150-03U-06A7-2 | 6.7 | 1.5 | 6.0 | 1.5 | R1 | CALL |
ACS150-03U-07A5-2 | 7.5 | 2 | 6.8 | 2 | R1 | CALL |
ACS150-03U-09A8-2 | 9.8 | 3 | 8.8 | 2 | R2 | CALL |
For your specific application contact us for pricing. |
480Vac Ratings (pricing)
3-phase supply voltage 380, 400, 415, 440 or 480 V. The power ratings are valid at nominal voltage, 480Vac at 50°C (120°F).
Type Code | Nominal ratings | IP 20 | ||||
40°C (104°F) | 50°C (120°F) | Frame | ||||
I2N A | PN HP | I2N A | PN HP | List Price | ||
3-Phase Un = 380…480V (380, 400, 415, 440, 460, 480V) | ||||||
ACS150-03U-01A2-4 | 1.2 | 0.5 | 1.1 | 0.5 | R0 | CALL |
ACS150-03U-01A9-4 | 1.9 | 0.75 | 1.7 | 0.75 | R0 | CALL |
ACS150-03U-02A4-4 | 2.4 | 1 | 2.2 | 1 | R0 | CALL |
ACS150-03U-03A3-4 | 3.3 | 1.5 | 3.0 | 1.5 | R1 | CALL |
ACS150-03U-04A1-4 | 4.1 | 2 | 3.7 | 2 | R1 | CALL |
ACS150-03U-05A6-4 | 5.6 | 3 | 5.0 | 3 | R1 | CALL |
ACS150-03U-08A8-4 | 8.8 | 5 | 7.9 | 5 | R1 | CALL |
For your specific application contact us for pricing. |
ABB Inc. Low Voltage Drives 16250 W. Glendale Drive New Berlin, WI 53151 | ABB Inc. Drives & LVC Canada 3299 J.B. Deschamps Blvd. Lachine, Quebec H8T 3E4 | ||
Telephone Fax Internet | (800) 752-0696 (262) 785-0397 http://www.abb.us/drives | Telephone Fax Internet | (800) 215-3006 (514) 420-3137 http://www.abb.com/motors&drives http://www.abb-drives.com |
© 2006 ABB Inc. ACS150-PHTC01U-EN REV B, Effective: 12/1/05.
Specifications subject to change without notice.